A 10-Point Plan for (Without Being Overwhelmed)

Quick Tips to Finding Hidden Piping and Valves

Should you be a homeowner then knowing the details of your home like the back of your hand is something that is very important. One of the things that is especially critical is finding hidden water as well as gas piping and valves and it is important to know where they are especially if you have to deal with things like an emergency. There are various ways that you can be able to do that and some of the ways that you can be able to ensure that you do that are briefly highlighted below.

In order to locate the gas shutoff valve then you need to find out if you have natural gas since the shutoff valve will be located outside the home just before the gas meter. Such nubs are usually rectangular in shape and usually use a wrench and gas companies do not recommend touching them. There is however a side valve that is usually located where the gas pipe first enters or much further down the line.

There are high chances that the gas pipes you have are made from flexible copper if you own a modern home and the valves are most likely to be located in the utility room. When you have such a piping system you are usually sure that the gas system that you have usually has a high pressure. Such gas systems usually have the shutoff valve near the water heater or the furnace.

For water meters, you are likely to get that you have two shutoff valves one before and the other after the meter. Should you be in an environment where it gets really cold then the shut off points is most likely to be located inside the home to prevent things like freezing. For milder climates, you are most likely to find out that the valves are located in an underground lid or box next to exterior.

Take time to look at property reports if you are finding it hard to locate water shut off valve since they are usually indicated in property reports given in the last phase of the property purchase. It is important to look keenly at the report since it will show you where the valve is located. With the report, you are able to see the picture of the valves so that you are able to know how they look like so that you can shut them off.

With most automatic sprinklers located underground, there is a very high chance that they may be a little bit harder to find. For such valves using a metal detector may come in handy since they are usually metallic in nature. It is easy for you to be able to know more info. about where to start when you have a plan even though it may not point out the exact location of the valve.

Featured post: If You Think You Get , Then This Might Change Your Mind

Related posts